CE Certification Rgbw Cob Led Strip Manufacturers – High Light 110/220V 5050 SMD LED Strip Light – Hengsen

I.Features

1. Adpot SMD5050 LED as lighting sources;
2. 5merters per reel, cuttable by specified length;
3. Good flexibility, can be coated onto fitting surface very well;
4. Low light decline, long lifespan(>30,000hours);
5. Various of waterproof types for different evironments;
6. Complete accessories for easier installation.

II.Parameter

III.Dimension

IV.Accessories

V.Accessories

VI.Operation guidance (Waterproof)

Cut the light strips at the mark” scissors”.or by every 3 leds
Open the siliconglue cap and inject the silicon gel into the endcap without holes
Push the strips into the end cap and let the silicon gel dry for 1 hour
Put the connector wire through the end cap holes
Solder the wire on the PCB
After solder the two wires correctly,push the strips into the end cap with the wires carefully
Inject the silicon gel in the end cap
Make sure the end cap and strip are connected well and let silicon gel dry for 1 hour

VII.Connection Drawing

power supply

Note: Under use, the suggestion for the power would be 20% bigger than LED strip’s Max power to insure the uniformity of the brightness and long time good performance of power supply.

VIII.Note

1.Please apply different IP rate products according to different environmental conditions;
2.Notice no damage to the PCB’s circuit under installation;
3.Adopt suitable power supply to match the led strips. Power is 20% bigger than max.power of led strips to ensure the long time performance of power supply;
4.Forbid to install it when power on. before power on ,please make sure that wiring is correct once installation finished;
5.In order to get the best lighting effect and no damage. Max.continuous length is 15 meters;
6.Please do not stare at the light for a long time when it is working to protect your eyes;
7.Only professional personnel may dismantle and repair.

IX.Application

1.Decorative lighting for hotel, advertising light box, KTV, etc;
2.Backlight for edge lighting/signage lighting;
3.Factories or offices lighting;
4.Holiday decorative lights, display and exhibition lighting;
5.Residential or public facilities;
6.Cove lighting.